Diameter of thinnest archwire?

This is the place to post general questions and comments about all areas of orthodontic treatment. Before you post a question, use the forum's SEARCH tool to see if your question has already been answered!

New Members: YOU MUST MAKE A POST WITHIN 24 HOURS OF REGISTERING OR YOUR ACCOUNT WILL BE DELETED. In other words, don't sign up unless you plan to actively participate in the message board immediately. This is necessary to keep out spammers and lurkers with bad intentions. Of course, you can read most forums on the board without registering.

DO NOT POST FULL-FACE PHOTOS or personal contact information on this website. We have had problems with people re-posting members' photos on fetish websites. Please only post photos of your teeth, not your whole face. Keep your email and your personal information private. Thank you.

Moderator: bbsadmin

Post Reply
Message
Author
User avatar
YRhino
Posts: 25
Joined: Mon May 12, 2008 12:47 pm
Location: Raleigh NC

Diameter of thinnest archwire?

#1 Post by YRhino »

I had my second adjustment today to have my archwire changed out. I asked the tech how large the new archwire was and he said 18. I asked how large the one he took out was and he said "the thinnest". Not sure what "the thinnest" means. Does anyone know the diameter of the thinnest archwire? Also, how large to they get? Where does 18 fit on the scale of archwires?

User avatar
YRhino
Posts: 25
Joined: Mon May 12, 2008 12:47 pm
Location: Raleigh NC

#2 Post by YRhino »

Ah! Was able to find the answer to my own question. Here it is in case anyone else ever wonders:

Generally the orthodontic archwires are made from a stainless steel wire (spring wire) having a diameter of 0.01 to 0.022 inches for the round wires and cross-section of 0.10 × 0.020 to 0.022 × 0.028 inches for the rectangular wires.

I went from a 0.01 round wire to a 0.018 x 0.018 rectangular wire. Wow. Seems like a big jump.

purpleteeth
Posts: 448
Joined: Mon Feb 25, 2008 4:45 pm
Location: Texas
Contact:

#3 Post by purpleteeth »

WOW! This all sounds so complicated... All I know is that my wires are now more visible than they were in the beginning, as they are thicker and stronger. I don't know what shape they are either, but think they might rectangles right now.
<img>

eggraid101
Posts: 86
Joined: Mon Aug 06, 2007 11:39 am
Location: Leesburg, VA

#4 Post by eggraid101 »

Most orthodontists don't use a wire as thin as 0.010 inches, I would say the most common "thinnest" wire is 0.014" in diameter. If the tech told you the new one is an "18", I would guess that it is round, rather than rectangular. But, myabe not. The move from a 0.014 nickel titanium to a 0.018 is not that big, and is very common.
Russell Mullen, DDS MS
Leesburg, VA

Remember: your orthodontist knows your dental history and orthodontic condition best. I can guide you toward better orthodontic information than if you were left on your own and hopefully in doing so play a small part in your quest to achieve a beautiful, fully functional smile, but you should consider your orthodontist the best source of information.

http://www.mullenortho.com

Lisa65
Posts: 3469
Joined: Thu Jun 01, 2006 12:12 pm

#5 Post by Lisa65 »

My first wire was a 0.012" round wire and I kept it for 2 adjustments. My ortho said I needed a very flexible wire because my top teeth were so misaligned.

I've gradually worked my way "up" and I now have 18x25 SS square wire on the bottom and a slightly thinner square one on the top (not sure what it is)

Post Reply